ls3 crate motors and emission (abgastest)

ls3 crate motors and emission (abgastest) - Druckversion

+- Corvetteforum Deutschland (https://www.corvetteforum.de)
+-- Forum: Technikforen (https://www.corvetteforum.de/forumdisplay.php?fid=1)
+--- Forum: C 6 Technikforum (https://www.corvetteforum.de/forumdisplay.php?fid=74)
+--- Thema: ls3 crate motors and emission (abgastest) (/showthread.php?tid=71971)

Seiten: 1 2

ls3 crate motors and emission (abgastest) - foler - 28.06.2013

hello from croatia...
I will need to choose ls3 motor fro my bmw m3 e36 project. this motor come in 3 different version. standard 430hp version, ls376/480 and ls376/525hp version. In croatia we need to pass emission (abgastest) test with this parameters: lambda 0.97-1.03 and CO max 0.3%.
Anyone have experience with this motors and emission test?

thanks

RE: ls3 crate motors and emission (abgastest) - tanith - 28.06.2013

Hi! The closest specialist for your questions should be coolchevy. His homemebase is in austria/graz and he`s of course competent to answer. Here´s the link to his homepage..

.https://www.coolchevy-raceparts.com/engines-LS1-LS6.html

regards

Frank

RE: ls3 crate motors and emission (abgastest) - Corvalex - 28.06.2013

I can´t help you with your questions, but it sounds interesting.

Tell us more! Do you want to drift with the M3?

- foler - 28.06.2013

No true drift but fast street driving. I am tired from bmw "high Technologies" which is very expensive. Vanos problems, valve adjustments, low torque, high price for aftermarket engine parts, high gas consumption in relation to power...
LSx engines in e36 is ideal combination. Even have lower gas consumption under same driving condition. I want to build car like this:
https://forums.bimmerforums.com/forum/showthread.php?t=1865059

RE: ls3 crate motors and emission (abgastest) - foler - 28.06.2013

Zitat:Original von tanith
Hi! The closest specialist for your questions should be coolchevy. His homemebase is in austria/graz and he`s of course competent to answer. Here´s the link to his homepage..

.https://www.coolchevy-raceparts.com/engines-LS1-LS6.html

regards

Frank

mailbox is overfilled...

This Message was undeliverable due to the following reason:

The user(s) account is temporarily over quota.

- CCRP - 28.06.2013

Foler,

I have done a few of those BMW conversions on E30 and E46. There good kits out there and with stock cats an LS3 can be put through emissions testing rather easily

- foler - 28.06.2013

Zitat:Original von coolchevy
Foler,

I have done a few of those BMW conversions on E30 and E46. There good kits out there and with stock cats an LS3 can be put through emissions testing rather easily

is this cars drive on street, street legal? I ask because we have here in croatia CVH institution which need to inspect vehicle. problems is with parts which is not original, like motor and tranny mounts. if you build some street legal lsx bmw this will be help for me and I can show this examples to CVH.
Please, write me some engine examples and prices. GM crate engines have very good prices. my goal is 450whp.

- CCRP - 28.06.2013

where from Croatia are you?

I will be Thursday on the dyno in Zagreb

- foler - 28.06.2013

Zitat:Original von coolchevy
where from Croatia are you?

I will be Thursday on the dyno in Zagreb

in zagreb....-))
I am on vacation so we can discus my project at any time...

- CCRP - 28.06.2013

ah OK.

We can meet at D.A.K Motorsports if you want, I'll let you know when I am there for Andrija's Z06

btw: it is info@coolchevy-raceparts.com