+- Corvetteforum Deutschland (https://www.corvetteforum.de)
+-- Forum: Technikforen (https://www.corvetteforum.de/forumdisplay.php?fid=1)
+--- Forum: C 4 Technikforum (https://www.corvetteforum.de/forumdisplay.php?fid=5)
+--- Thema: Drive shaft balance (/showthread.php?tid=5224)
Seiten:
1
2
- Bluewasp - 25.05.2003
HI, Well I check the drive shaft and the Front u-joint has some play... The rear one seems ok and the Transimisison yoke doesn't have ANY play. I was told a New drive shaft with u-joints and transmission slip yoke costs around $200.00... I think I'm going to go that route. Also my passenger side rear wheel bearing is shot. I just replaced it 5 months ago.. OH WELL... I'm going to replace the drive shaft, the wheel bearing and see if that fixes the problem.
I also indexed the drive shaft.......
- Magic91 - 25.05.2003
Hi,Robert
Bevor You replace the drive shaft, check what Hubsi wrote.
Check the weights on the shaft.Are the weights OK or maybe not available?
Mike
- Bluewasp - 25.05.2003
After I indexed the drive shaft I have to say 85% of the vibration is gone... YES!! :) I need to replace the bad u-joint on the shaft and one wheel bearing and I should be good to go.