09.08.2005, 13:57
Hallo,
und folgendes steht im Reparaturhandbuch ...
Caution: On ABS equipped vehicles, use care when working in the vicinity of the brake sensing components.
1. Raise the front of the vehicle, support it securely on jackstands and remove the front wheel.
2. Remove the brake caliper assembly and hang it out of the way on a piece of wire so there is no strain on the brake hose.
3. Remove the brake disc.
4. Remove the bolts and nuts and detach the hub and bearing assembly. On ABS-equipped models, take care not to damage the toothed sensor ring when withdrawing the assembly from the knuckle.
5. To install, place the assembly in position, insert the bolts through the access holes in the hub and install the nuts. Tighten the nuts and bolts to the specified torque.
6. Install the brake disc and caliper and lower the vehicle.
Hub and bearing-to-knuckle bolt and nut - 62 Nm
Caliper mounting bracket bolts - front wheels (85 and later) - 180 Nm
Gruß, Al
und folgendes steht im Reparaturhandbuch ...
Caution: On ABS equipped vehicles, use care when working in the vicinity of the brake sensing components.
1. Raise the front of the vehicle, support it securely on jackstands and remove the front wheel.
2. Remove the brake caliper assembly and hang it out of the way on a piece of wire so there is no strain on the brake hose.
3. Remove the brake disc.
4. Remove the bolts and nuts and detach the hub and bearing assembly. On ABS-equipped models, take care not to damage the toothed sensor ring when withdrawing the assembly from the knuckle.
5. To install, place the assembly in position, insert the bolts through the access holes in the hub and install the nuts. Tighten the nuts and bolts to the specified torque.
6. Install the brake disc and caliper and lower the vehicle.
Hub and bearing-to-knuckle bolt and nut - 62 Nm
Caliper mounting bracket bolts - front wheels (85 and later) - 180 Nm
Gruß, Al
[IMG] https://www.corvetteforum.de/fotos/gtc16.gif[/IMG]